Street Sounds Online » Rockford Fosgate

Rockford Fosgate P2D210 Subwoofer

scott136 — Fri, 02 Mar 2007 15:09:53 +0000

No bright colors, strange shapes, or shiny metal. Rockford Fosgate’s Punch Stage 2 subwoofer boasts a simple design and no-nonsense look that tells you it was born to make great bass.The Punch Stage 2 10″ subwoofer offers you superior performance as its polypropylene cone and responsive poly-foam surround fulfill your craving for truly solid bass. The steel basket maintains its shape in the face of fierce pounding, so your bass stays accurate at high levels. These Punch Stage 2 subs come with dual 2-ohm voice coils that can be wired to draw added power from your amp or to fit into a multi-sub system.

A honkin’ 62-ounce magnet exerts tight control over the sub’s inner workings so cone movement stays straight and true. An innovative “Venturi-effect” design cools your sub by allowing hot air to move more quickly down the sub’s center and out of the lower vents.

Details:
	»	10″ subwoofer with dual 2-ohm voice coils
	»	molded polypropylene woofer cone with poly-foam surround
	»	ABS/acrylic parabolic dust cap
	»	“Venturi-effect” design for maximum cooling of motor structure
	»	power range: 50-250 watts RMS (125 watts per coil) — 500 watts peak power handling
	»	frequency response: 30-250 Hz
	»	sensitivity: 84 dB
	»	top-mount depth: 5-3/4″
	»	sealed box volume: 0.5-0.85 cubic feet
	»	ported box volume: 1.40 cubic feet

Rockford Fosgate P1S410 Subwoofer

scott136 — Fri, 02 Mar 2007 15:04:47 +0000

Looking to add some punch to your car’s sound system? Rockford Fosgate built its reputation on great bass, and their rugged Punch Stage 1 subs dish out powerful lows that will accentuate your music’s strengths.The molded polypropylene cone works with a poly-foam surround to deliver accurate response, while the stitched-on, flexible tinsel leads hang tough through violent cone movement so you get consistent performance. The steel basket provides a rock-solid foundation for these tenacious thumpers, and you get a PVC magnet cover for additional protection.

Details:
	»	10″ 4-ohm subwoofer
	»	molded polypropylene woofer cone with poly-foam surround
	»	power range: 50-150 watts RMS (300 watts peak power)
	»	frequency response: 30-250 Hz
	»	sensitivity: 85 dB
	»	top-mount depth: 4-7/8″
	»	sealed box volume: 0.5-0.85 cubic feet
	»	ported box volume: 1.40 cubic feet

Rockford Fosgate Punch P5002 Amplifier

scott136 — Wed, 29 Nov 2006 20:45:23 +0000

Don’t let your sound system dance around the ring; fire up a Punch series amplifier from Rockford Fosgate and enjoy a knockout performance every time! These amps will sting your speakers with plenty of clean power, while serving up the sound-shaping controls and high-quality components you need to create a heavyweight audio system.The innovative circuit design, MOSFET output stages, and proprietary technology inside the Punch P5002 will bring out extraordinary detail in your music, with ultra-clean power you just can’t get from a lesser amp. You get 125 watts RMS per channel in stereo mode (plenty for a set of power-hungry component speakers, or a couple of subwoofers), or bridge the P5002 for an enormous 500 watts RMS.

It takes more than just muscle to create a prize-winning car audio system. So, the P5002 sports variable high- and low-pass crossovers — which help minimize distortion by sending your speakers only the frequencies that they can handle — and a Punch bass boost (0-18 dB at 45 Hz) with a wired remote for hands-on control.

Details:
	»	2-channel car amplifier
	»	125 watts RMS x 2 at 4 ohms (250 watts RMS x 2 at 2 ohms)
	»	500 watts RMS in bridged mode at 4 ohms (4-ohm stable in bridged mode)
	»	stereo or bridged mono output
	»	CEA compliant
	»	MOSFET power supplies and outputs
	»	MEHSA transfers heat efficiently from the MOSFET devices to the heat sink for high performance
	»	TOPAZ eliminates ground loop noise
	»	trans-ANA circuitry keeps preamp signal clean
	»	NOMAD “intelligent” protection circuitry
	»	Tri-way capable
	»	variable high-/low-pass crossover (40-400 Hz, 12 dB/octave)
	»	variable Punch Bass boost (0-18 dB at 45 Hz) with wired remote
	»	4-gauge wiring kit recommended — wiring and hardware not included with amplifier
	»	13-5/8″W x 2-1/2″H x 11-3/16″D

Rockford Fosgate P112S4 Subwoofer

scott136 — Wed, 29 Nov 2006 20:39:00 +0000

With a slick look and strong sound, Punch Stage 1 subwoofers are the way to get the aggressive bass of Rockford Fosgate in your vehicle. The molded polypropylene woofer cone with a foam surround delivers strong, accurate bass. The stamped steel basket is stepped for full woofer excursion, while a 1-1/2″ aluminum voice coil is used for reliable power handling.The P112S4 12″ subwoofer handles up to 150 watts RMS, and can be mounted in a sealed or ported box.

Details:

12″ 4-ohm subwoofer
molded polypropylene woofer cone with foam surround
frequency response: 20-200 Hz
power range: 50-150 watts RMS
peak power handling: 300 watts
sensitivity: 86 dB
top-mount depth: 5-3/8″
sealed box volume: 1.25 cubic feet
ported box volume: 1.75 cubic feet

Rockford Fosgate T115D2 Subwoofer

scott136 — Thu, 16 Nov 2006 14:39:29 +0000

The fanatics at Rockford Fosgate are always testing the limits of bass — and that’s how Power Series Stage 1 subwoofers were born. Ideally suited for use with Power Series amps, everything about these innovative woofers screams “hard-hitting sound.”The aluminum parabolic cone has a high-excursion rubber surround for the kind of travel that ensures max bass. The massive 220 oz. double-stacked magnet structure and oversized 3″ anodized aluminum voice coils handle just about all the power you can throw at them. Spider venting keeps the woofer cool even when you run it long and hard.

The T115D2 15″ subwoofer can blast away in either sealed or vented enclosures. The dual 2-ohm design lets you wire for high output or a multiple woofer setup.

Details:

15″ subwoofer with dual 2-ohm voice coils
aluminum parabolic woofer cone with rubber surround
cast aluminum basket
power range: 150-600 watts RMS (300 watts per coil)
peak power: 1,200 watts
frequency response: 26-250 Hz
sensitivity: 87.5 dB
mounting depth: 8-1/2″
sealed box volume: 2.0-2.5 cubic feet
ported box volume: 2.25-3.25 cubic feet

Rockford Fosgate T215D2 Subwoofer

scott136 — Thu, 16 Nov 2006 14:30:15 +0000

What do you get when you combine high quality materials, state-of-the-art engineering, and a liberal dose of Rockford Fosgate’s famous bass fanaticism? The answer: Power Stage 2 subwoofers. Ideally suited for use with Power Series amps, these woofers handle incredible power levels — up to 2,000 watts peak — to blow away just about anything that stands in their path.The mind-blowing 304-ounce magnet structure is triple stacked, and the huge 4″ voice coils were born to handle big power. The aluminum parabolic cone with its high-excursion rubber surround hits quickly and accurately. Spider venting keeps the woofer cool even when you run it long and hard.

Details:

15″ subwoofer with dual 2-ohm voice coils
aluminum parabolic woofer cone with rubber surround
cast aluminum basket
power range: 150-1,000 watts RMS (500 watts per voice coil)
peak power handling: 2,000 watts
frequency response: 24-250 Hz
sensitivity: 87 dB
mounting depth: 10″
ported box volume: 2.25-3.25 cubic feet

Rockford Fosgate Punch P850.2 Amplifier

scott136 — Mon, 13 Nov 2006 14:44:52 +0000

Rockford Fosgate continues its commitment to outstanding design with the 2-channel Punch P850.2 amplifier. Specially-designed transistors perform better than the “off-the-shelf” models most manufacturers use. Additional heatsink material keeps these critical power components running cooler, reducing distortion and increasing amp efficiency.

The P850.2 delivers the power you need to kick up the performance of premium component speakers or drive a couple of subs, or you can run it in single-channel mode to send 850 watts to a high-performance subwoofer. The variable frequency filters adapt the amplifier to fit the job at hand, while the wired Punch Bass EQ kicks up the lows when it’s time to get the car shaking.

Details:
	»	2-channel car amplifier
	»	225 watts RMS x 2 at 4 ohms (425 watts RMS x 2 at 2 ohms)
	»	850 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
	»	variable high- and low-pass filters (40-400 Hz, 12 dB per octave)
	»	wired Punch Bass EQ (0-18 dB at 45 Hz)
	»	Focused Mass Heatsink design
	»	removable connector cover
	»	TO-247 MOSFETs run cooler than standard transistors
	»
	»	preamp inputs and outputs
	»	fuse rating: 40A x 3
	»	4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
	»	17-5/8″W x 2-1/16″H x 11-1/8″D
	»	warranty: 1 year

Rockford Fosgate Power T30001bd Amplifier

scott136 — Mon, 13 Nov 2006 14:34:36 +0000

Rockford Fosgate Power series amps occupy the top of the amplifier food chain — with their fine-tuned audio controls, extreme durability, and proprietary technologies (like TRANS-ana circuitry for ultra-clean signal transfer and MEHSA for cool-running power) they are capable of stronger, more reliable performance than most other amplifiers on the market. If you’re looking for a dedicated, bass-driving machine, say hello to the Power T30001bd. Equipped with Class bd technology (Rockford Fosgate’s patented digital amp design), this beast produces an amazing 75% efficiency rating with a highly stable output. Even under heavy loads, it will maintain steady power flow and a safe operating temperature, saving your music from clipping and distortion. The Power T30001bd operates safely at 1-ohm impedance, punching out a monumental 3,000 watts!

The variable low-pass filter with near-vertical 24 dB per octave slopes lets you decide exactly which frequencies to send to your subs. Trigger a bass blast (up to 18 dB, variable from 35-70 Hz) with the dash-mountable remote. An infrasonic filter prevents frequencies below the audio range from being sent to the subwoofer, improving subwoofer power handling and performance for maximum impact. The Class bd design combines the efficiency of a Class D amp with sound quality of a Class B amp and allows Rockford Fosgate to design this amp with a smaller footprint, giving you more installation options than you’ll usually find in high-powered amps.

Details:
	»	1,000 watts RMS x 1 at 4 ohms
	»	2,000 watts RMS x 1 at 2 ohms
	»	3,000 watts RMS x 1 at 1 ohm
	»	Class bd technology
	»	1-ohm stable
	»	1/0-gauge power and ground leads recommended — wiring and hardware not included with amplifier
	»	variable low-pass filter (32-250 Hz, 24 dB/octave)
	»	Para-Punch bass EQ (0-18 dB with variable center frequency between 35-70 Hz) with wired remote control
	»	Infrasonic filter (28 Hz, 12 dB/octave)
	»	MOSFET power supplies and outputs
	»	MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability
	»	TOPAZ noise-killing differential inputs eliminate 80% of ground loop noise between the head unit and the amp.
	»	TRANS-ana circuitry keeps preamp signal clean
	»	NOMAD advanced protection circuitry monitors temperature, voltage, current and impedence, and provides “intelligent” shut-down protection without limiting system performance
	»	fan cooled (3-speed variable fan design)
	»	preamp inputs and outputs
	»	fuse rating: 300 amps
	»	dimensions: 33-1/4″W x 2-3/4″H x 12-3/4″D